Nortel MICS 7.0 w/ PRI. I'm looking to add a wireless handset so that our warehouse guy can have some handheld capability. I've seen some T7406E sets available on e-bay and I guess this would be one option. I also have a spare ATA2 and I could also investigate this route using a new analog cordless handset & base. Any thoughts or hardware recommendations?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T7406E on MICS
- Thread starter rjbied
- Start date
I'd recommend using the ATA2 with a decent analog cordless phone. Then give it prime line intercom and access to the line pool for outgoing calls, if desired.
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
curlycord
Programmer
I agree.
Nortel ones are a pain.
Try Engenuis, rugged for warehouse people and far range.
________________________________________
Add me to LinkedIN
**New Allworx Forum**
=----(((((((((()----=
Toronto, CAN
Nortel ones are a pain.
Try Engenuis, rugged for warehouse people and far range.
________________________________________
Add me to LinkedIN
**New Allworx Forum**
=----(((((((((()----=
Toronto, CAN
allworxguy
Vendor
The only Nortel/Avaya cordless i would recommend is the Digital mobility setup. The 7406/7406e phones are garbage.
Marv ccna
Marv ccna
- Status
Similar threads
- Locked
- Question