T7406 Scanning...

[demogorgon15]

Hello,

I have a T7406 that has recently seemed to have lost communication with the base unit, right now it is constantly displaying "Scanning...", I tried resending the SS code but I keep getting "Send Error! XXXXXX".

Does anyone have an idea on what could be the problem and any ideas on solutions?


Thanking you in advance,
Demogorgon

 

[deadringer22004]

You need to power the base off and then on. Within 15 seconds send the ss code. Maybe you are already doing that.

 

[demogorgon15]

Hi Deadringer,

Thanks for the reply, I forgot to include that I have tried doing that many times, but no luck iam still getting the "Send Error! XXXXXX" message.

 

[norstarboy125]

do u have multiple handsets connected to a base or is that the only cordless set.

 

[RikRodgers]

Also, try plugging a digital set into the basecord feeding the cordless ext to the base.

 

[gtechjoe]

Try changing the security code make sure your dip switches are not out of alignment and set is as 1, 2, or 3 then send s.s. code again by powering up and sending code at same time.