t7316e question 3

[sumedud]

i have a dozen or so of these phones and we have 6 lines. most of the phones have lines starting at the fourth button down on the left side with line 6 being directly across from line 1.

one phone however had conference set up in the place where all the others have line 6 with no line 6 at all. i figured out how to erase the conference hoping it would go back to line 6 but now it is just empty. how would i go about getting line 6 assigned to that button again?

 

[sumedud]

thank you very much for your time then! ; )

 

[sumedud]

ok, finally had time to try the debug and made it to the adress ok, i am having trouble reading the results that i copied down. is it okay to post them here for help?

 

[curlycord]

After you enter your address and press next you will see

1C0B2C: 0304 0304
press next again
1C0B2C: 0506 0F0F

Password above is 343456
If still an issue then post them.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[sumedud]

hmm, mine was all zeroes. 0000 0000 i hit next about ten times before it got out of the zero sets.

 

[curlycord]

up to 6 x 0's would be password.

If still an issue maybe the date or year is wrong , did you change it?.

If it's at today's date try 963500 as the debug then see if it spits out different numbers.








=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[curlycord]

Also when entering address make sure you see it on the screen before pressing next (entering correctly).

1C0B2C

i.e
-to move cursor over press #
-to enter C you need to press 2 three times.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[sumedud]

i did make it in, tried some of the other addresses and one of them worked.

is the config password changed in the section "installer password" under maintenance?

 

[curlycord]

No, under passwords and then installer.

=----(((((((((()----=
curlycord

http://www.curlycord.com