Hi.
Im fairly new to Sun servers so please forgive me if I ask something obvious =)
I recently installed a Sparc T5120 Server. The server has a redundant PSU. During installation when I plugged in the second PSU the server powered off.
Since then the server only powers on from the ILOM. Until I log through the the Service Management port I cannot turn on the server. There are no leds active on the front pannel.
The moment I log in through the ILOM the OK led starts to flash and I can turn on the server.
This happens every time I remove the power from the server (if I poweroff normally and don't remove the power supply I can still power back any time).
Any help would be much appreciated!
Im fairly new to Sun servers so please forgive me if I ask something obvious =)
I recently installed a Sparc T5120 Server. The server has a redundant PSU. During installation when I plugged in the second PSU the server powered off.
Since then the server only powers on from the ILOM. Until I log through the the Service Management port I cannot turn on the server. There are no leds active on the front pannel.
The moment I log in through the ILOM the OK led starts to flash and I can turn on the server.
This happens every time I remove the power from the server (if I poweroff normally and don't remove the power supply I can still power back any time).
Any help would be much appreciated!