Anyone had any issues doing a cold boot using a dvd from the ok> prompt on these servers?
(oh, and yes, I have tried many different medias)
I have two brand spankin' new T5120's.
For the DAM of me, they will NOT boot from a DVD. If I do a,
boot cdrom, boot cdrom -s, boot cdrom - install ...etc, It errors with the following error message. I have done a little research and it appears others have had the same issues with the T5120. I opened a case with Sun on this issue about 5 days ago, they are stumped, they have done the normal replace part theory, I upgraded the firmware...still no work. Since they do not know what to do next, I have to hound them cause they do not want to call me back.
The weird part is, I can manually mount the dvd I put into the dvd drive from the pre-installed OS the T5120's have.
I usually do not need the dvd drive, but since my jumpstart server is not connected to the subnet I need to install this server, I was just going to do it the old fashion way. Especially since no others servers will be added to the subnet in the future.
I sure hope I am doing some id10t error, but .....
======================================================
The device boot path is correct, I have verified it.
also, devalias shows the proper path to the dvd
Error:
0} ok boot cdrom
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f File and args:
ERROR: boot-read fail
Can't open boot device
Thanks
DJR
(oh, and yes, I have tried many different medias)
I have two brand spankin' new T5120's.
For the DAM of me, they will NOT boot from a DVD. If I do a,
boot cdrom, boot cdrom -s, boot cdrom - install ...etc, It errors with the following error message. I have done a little research and it appears others have had the same issues with the T5120. I opened a case with Sun on this issue about 5 days ago, they are stumped, they have done the normal replace part theory, I upgraded the firmware...still no work. Since they do not know what to do next, I have to hound them cause they do not want to call me back.
The weird part is, I can manually mount the dvd I put into the dvd drive from the pre-installed OS the T5120's have.
I usually do not need the dvd drive, but since my jumpstart server is not connected to the subnet I need to install this server, I was just going to do it the old fashion way. Especially since no others servers will be added to the subnet in the future.
I sure hope I am doing some id10t error, but .....
======================================================
The device boot path is correct, I have verified it.
also, devalias shows the proper path to the dvd
Error:
0} ok boot cdrom
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f File and args:
ERROR: boot-read fail
Can't open boot device
Thanks
DJR