Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 tie question to a Cisco server for RAS

Status
Not open for further replies.

jkaval

Technical User
Jul 15, 2008
17
US
I have a T1 that is connected to a RAS server for people who still actually dial in for VPN. I can call the number internally and it works fine, but it fails if I call from the outside world. The NCOS is set to 0 on all of the TIE trunks into the RAS and the TGAR is set to 9 so it isn't the same as the route of our incomming service. I printed out the RAS route and trunk programming below. Let me know if you see anything that looks odd. Thanks!


TYPE RDB
CUST 00
ROUT 70
DES RAS
TKTP TIE
NPID_TBL_NUM 0
ESN YES
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL VCE
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 89070
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO ESN5
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3

IENB 5
TFD 0
VSS 0
VGD 6
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR YES
INC YES
LAST YES


PAGE 002

QREC YES
OAL YES
AIA NO
OAN YES
OPD NO
CDRX NO
NATL YES
VRAT NO
MUS NO
RACD NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

REQ: ***
OVL000
>ld 20

PT0000
REQ: prt
TYPE: tnb
TN 143 1
SPWD
DATE
PAGE
DES

DES RAS
TN 143 01
TYPE TIE
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 0
RTMB 70 1
TGAR 9
SIGL EM4
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS UNR DTN ECD WTA LPR APN THFD HKD
P10 VNL
TKID
AACR NO
DATE 22 JUL 2008
 
It could be your NCOS setting on your inbound trunks. They may need to be set at a higher FRL.
 
If my NCOS is 0 on the T1 then it should matter what the NCOS is on the incomming trunks correct?
 
the ncos of the trunk has to be high enough to make the call.. when you dial in an try to tandem to another route.. your call permission is tied to the ncos of the inbound trunk

john poole
bellsouth business
columbia,sc
 
If the NCOS is 0 for the TIE lines so any NCOS of the incomming trunks should work.
 
Not necessarily, someone could have changed the FRL's in LD 87 and 0 could actually be the highest restriction.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top