T1 Connections without seeing the router hops.

[Mav]

I want to have an enthernet network with a routed t1 at each end and have it appear that the T1 connections are the same segment (essentially not seeing the router hops in between)?&nbsp;&nbsp;I have a ppp T1 with 1720 Cisco routers on each end.&nbsp;&nbsp;any info on how to configure this?&nbsp;&nbsp;Been trying for 4 days and my boss is a little warm under the collar.<br><br>TIA<br><br>Mav.

 

[jeter]

Are your routers seeing each other ? please show your configuration . Is this a local ppp ? <A HREF="mailto:JoeFisher@LasVegas.com">JoeFisher@LasVegas.com</A>

 

[thekidcisco]

Can you email me a network diag? It's a bit hard to visualise what you are trying to do.&nbsp;&nbsp;Email - <A HREF="mailto:caitanya@hotmail.com">caitanya@hotmail.com</A>

 

[Mav]

Well Guys,<br><br>I have to say that I got it yesterday.&nbsp;&nbsp;I had to turn on the bridge crb function in the cisco router and use unnumbered IP to the serial interface off of the fast ethernet interface.<br><br>Mav.