Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 and Analog voice port on 2821

Status
Not open for further replies.

Eitsalo

IS-IT--Management
Aug 9, 2006
241
CA
Hi, can you have T1 and analog (FSX & WIC cards)on the same router 2821? I have configured it but when I dial to port "0" on FXS port, the phone doesn't ring. Here it is:
!
voice-port 0/0/0:23
!
voice-port 0/1/0
echo-cancel coverage 32
connection plar opx 5585
caller-id enable

My Ephone:
ephone-dn 1 dual-line
number 5585 pickup-group 5
label 5585
description HotLine
name TempLine
call-forward busy 1234
call-forward noan 1234 timeout 18
huntstop channel
!
!
ephone 1
mac-address 0000.xxxx.xxxx
type 7941
button 1:1
!
What am I missing or this is not suppose to work? Please help.
Thanks in advance...
 
If you are trying to call into port 0/1/0 to ring the phone, you need an FXO not an FXS. An FXS PROVIDES dial tone to an analog device, an FXO accepts analog dial tone from the local CO so when you call the number, the local CO sends ring generator and the FXO would act on your 'plar' statemenet to ring the phone.
 
All work now, thanks for your help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top