t or m series set just stops working

[Racecartim]

I have a mics ksu in one building with a 0x16 in another building hooked up by fiber extenders, my problem is I have 2 sets out of 16 that have issues all other sets are working fine, I have used a m or t series set on the ports but they will still stop working for a bit them start working, could it just be a port.

 

[curlycord]

Could be, or AMP cable wiring....swap the ports with other users and see if problem follows but make sure Set relocation is ON before you swap the jumpers.



________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[number1telecom]

Could be the 0x16 module going bad. I'd try swapping phones around as curly stated and see if the problem persists on the ports or on the phones.

http://www.number1telecom.com