Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

t or m series set just stops working

Status
Not open for further replies.

Racecartim

Technical User
Jan 12, 2012
7
CA
I have a mics ksu in one building with a 0x16 in another building hooked up by fiber extenders, my problem is I have 2 sets out of 16 that have issues all other sets are working fine, I have used a m or t series set on the ports but they will still stop working for a bit them start working, could it just be a port.
 
Could be, or AMP cable wiring....swap the ports with other users and see if problem follows but make sure Set relocation is ON before you swap the jumpers.



________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top