This is probably only my second or third post here, but I have issue with T.38 reliability just can't seem to narrow down. first an explanation on how things are setup
Mitel 3300MXEII (local)
Mitel 3300MXEII (Local resil)
Mitel 3300MXEII (Remote)
All three are clustered together, all calls go in and out of the local system to the remote site over a GIG dedicated internal link(We have Inet connecting all of our sites.), VoIP works fine but when it comes to faxes using T.38 we seem to have about a 10 to 20% failure rate. There are about 35 faxes currently at the remote site with 16 T.38 licenses in each system. I've tried everything, even mitel tech support is clueless so i'm asking here is there anything that can be done to make it more reliable? any tips would be appreciated, thanks
Mitel 3300MXEII (local)
Mitel 3300MXEII (Local resil)
Mitel 3300MXEII (Remote)
All three are clustered together, all calls go in and out of the local system to the remote site over a GIG dedicated internal link(We have Inet connecting all of our sites.), VoIP works fine but when it comes to faxes using T.38 we seem to have about a 10 to 20% failure rate. There are about 35 faxes currently at the remote site with 16 T.38 licenses in each system. I've tried everything, even mitel tech support is clueless so i'm asking here is there anything that can be done to make it more reliable? any tips would be appreciated, thanks