Hi all we currently have an option 11 rls.4 with a ntak09 card for a T-1 my question is what daughter board do i need if i'm using the ntak09 card and i have a pri on the way....i have to different answers ntak93 or ntbk51ba so i need your expert help!
where can i find what type of signaling my T-1 is? if i stat the loop in ld60 is see esf b8zs (is this the signaling)or is it in the T.N. when i print that out is see em4 signaling. which signaling would tell the provider i need for a new t-1
You may want to consider replacing the NTAK09 card with the newer TMDI card, NTRB21AA/AB/AC. This card has the D-channel handler built in. Since you have a CS4.00T system it is supported. The NTBK51BA has been MD by Nortel although it should be available through other channels. The PRI does not use signaling on the individual channels, the D-channel does all the work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.