Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T-1 PRI problems
- Thread starter RCTelecom
- Start date
lugerlover
Programmer
First-what release
Alarm code: 42
Reset:
No
Description:
The long term alarm threshold has been surpassed in the DTI for the detection of Loss of Frame.
Action:
Most likely an irregularity with the PSTN connections. Check the logs and look for events ranging from 315-336. If this alarm occurs more than once over a two-week period, contact your local support group
Alarm code: 75
Reset:
No
Description:
Clocking for PRI/BRI Lines is no longer synchronized with the network connection.
Action:
The digital link has been disconnected. Check the connection to your ISDN service provider.
Alarm code: 42
Reset:
No
Description:
The long term alarm threshold has been surpassed in the DTI for the detection of Loss of Frame.
Action:
Most likely an irregularity with the PSTN connections. Check the logs and look for events ranging from 315-336. If this alarm occurs more than once over a two-week period, contact your local support group
Alarm code: 75
Reset:
No
Description:
Clocking for PRI/BRI Lines is no longer synchronized with the network connection.
Action:
The digital link has been disconnected. Check the connection to your ISDN service provider.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
