T-1 loop information and corresponding Circuit IDs

[westsidedeuce]

Hello All
I've been given the job of providing T-1 loop information and corresponding Circuit IDs .
Including routes. I've traced the T1-spans cables from the CSU to the PBX.
I've ID the loops & circuits , my question is :

How do I know which loop is on which route ?
for example :

LTM Route 0
20/HCQS/0000-000PT

ld 80 trac 0 ( ACOD)
route 0 DID NTRK 144

Does it mean ?
20/HCQS/0000-000PT loop 0 route 0

Thanks for your help in advance
westside


Josephine Vigil
West Hills
California

 

[johnpoole]

ckt id does not have a use in the switch.. you would need to trace from the demark to the loop to verify that..

20/HCQS/0000-000PT ? des as entered by a tech? loop 0 means on your opt 11 the 1st card is a t1 and that is programed as route 0 in your switch..

ltm
cust 0
return, return... gets you all trunks and the route that are on.. i have partial ckt id as des.. 20 hcqs starts a ckt id, the 0000-000 is not a working ckt number..

john poole
bellsouth business
columbia,sc

 

[westsidedeuce]

I have traced the T1 span cable from the CSU to the PBX.

in ld 21 LTM I found the : Route 0 DES is 20HCQS730394-002 ( des by previous tech)
in ld 80 I traced the ACOD & got this : route 0 DID NTRK 144 ( 144 members)

How do I find out which loop this route belongs too?.

Thanks in advance , sorry for the confusion.
Josie




Josephine Vigil
West Hills
California

 

[KCFLHRC]

The LTM in LD 21 will give you the loop and channel number