T-1 channel provisioning

[Doubleshots]

Howdy
We have a Norstar MICS at a remote site with 4.1 software that we have 2 T-1's going to. One for long distance and data, the other for local service. On the voice and data T-1 we are currently using channels 1-4 for data and the rest for voice. Now we need to change this configuration to channels 1-8 data and the rest voice. I know how to make the changes in my CSU but I'd appreciate the steps involved in making this change on the Norstar side. I also need to know if I will need any key codes and can do this remotely. I have the basic ideal of where to go but some guidance would be most helpful.
Thanks
Dave

 

[filoloxnyc]

I do not have a solution for the programming but I was wondering if you could kindly share what equipment you are using for voice and data on the T1?

Is this E&M or PRI?

Have a great day!

 

[Doubleshots]

We are using a Kentrox CSU/DSU to break out the voice and data channels on a Sprint T-1. The voice is set to E&M.

 

[Pace1]

if you need a good CSU/DSU mini DAX llok into carrier access

http://www.carrieraccess.com

thats what we use and they are very very good

Double,
sounds like u should just have to de-provision the lines u want.
to deprovision
feature 266344 / hit next till u get to maintence/ show / then next till u get to provisioning / enter line / remove

If I said it, It has to be true.
Mario Mazza