System Speed

[sruiz]

I am trying to change a system speed number. I have tried reading the merl and end up getting stuck every time I try it. I am using LD18 and trying a CHG...after that, it just gets wierd. period.
Frustrated....
I would greatly appreciate anyones's input.

Thanks!

 

[sruiz]

I figured it out!!

who knew that the LSNO needs to be 0001

-s

 

[dawgnu]

in the future, you should not change speed calls list...but rather out and rebuild, as corruption, could soon follow

 

[sruiz]

oh oh.....is there anything i can do at this point?

I was under the impression ACD phones were the 'untouchables' when it came to changes?

thanks for the heads up!

 

[dawgnu]

nortel will tell you that, its better to out and rebuild.,
you can change entries, but nortel frowns on dnsz chgs.
you may want to out and rebuild this sclist, if you got the time. nertel may have fixed this prob. but im unaware if so.
print it first so you can enter all those ###'s agin.

late

 

[chaosnla]

You may want to keep a eye on it, as i too have seen this,

is scl 0001, the main scl. designated as ssu, or ssc?

or is it ,,,,designated as scc, or scu, (mind my letters in this,

 

[sruiz]

ok..you're going to have to help me understand all that.

forgive my ignorance.

How do I find out? I am really green. I have had a basic admin class about 1 year ago. And never used any of it, so now I am muddling around.

 

[dawgnu]

print the speedcall list 0001,(does it appear on a phone or phones?) if so print the phone tn. (ld 20 )

at request REQ prt
TYPE scl
lsno 0001 then enter to print.

now if you print a tnb of the phone. (thats,

req prt
type tnb
tn l s c u
cr cr cr cr then look at the key with scl and is it a

scc or scu. IF THE "SSU" IN THE PHONE DATTABASE, ABOVE ALL THE KEYS, IS 0001, THIS WOULD DETERMINE A SYSTEM SCL.

IF ITS JUST ON THE KEY OR KEYS. just rite down the numbers, for reprogramming, and out and rebuild. today would be best , so your system don't have time to data dump.

hope this helps