I have a Legend R7 V12. I am hooking up a standard single line portable phone through a 012 module. I can access an outside line by entering 9 or dial intercom stations directly.
The problem is that I can not dial a system speed dial number. On my old Merlin II that could be done by pressing #600 (or whatever the number was).
Also, according to the documentation, I should be able access call waiting by pressing the flash and #87. That does not work as well.
Any ideas?
Thanks
The problem is that I can not dial a system speed dial number. On my old Merlin II that could be done by pressing #600 (or whatever the number was).
Also, according to the documentation, I should be able access call waiting by pressing the flash and #87. That does not work as well.
Any ideas?
Thanks