System Reset by MAT/CAT 2

[adrianots]

Hi,

Someone knows if the command E0 will reset the system to factory values or just reinialize the MP?

 

[OzzieGeorge]

You can't reset to factory settings just by command! It would make the system too vulnerable! You have to physically change the sense switch setting and then reset the system to do this!

 

[adrianots]

Thanks,

The situation is exactly this - I need to reset the MP card remotely (as the option "System Reset" of MatWorks) and I was afraid that the command E02>2000 erase customer data.

 

[belevedere]

Command E0 is the same as if you pressed the reset button on the CPU. I suggest that you perform a back up to flash ROM before the reset. CMD EC6.