Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
System Dump Information REM busy
- Thread starter new2md
- Start date
whosrdaddy
Vendor
please give result of this command:
sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Thread starter
- #3
I thought everyone is on weekend 
<sacop:unit=rem2,lim=1,sector=ds,addr=1b0; MEMORY CONTENT ON ADDRESS POSITION
EXE A
ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 02 00 01 00 03 00 00 00 00 00 00 00 FF FF ................
END
<sacop:unit=rem2,lim=1,sector=ds,addr=1b0; MEMORY CONTENT ON ADDRESS POSITION
EXE A
ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 02 00 01 00 03 00 00 00 00 00 00 00 FF FF ................
END
whosrdaddy
Vendor
Ok,
now do this:
*WARNING* this is a dangerous command and I take no responsability if this crashes your PBX
sacos:unit=rem2,lim=1,sector=ds,addr=1b2,data=0;
verify with
sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
it should read
[tt]
ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 00 00 01 00 03 00 00 00 00 00 00 00 FF FF ................
[/tt]
if this is okay, try to dump
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
now do this:
*WARNING* this is a dangerous command and I take no responsability if this crashes your PBX
sacos:unit=rem2,lim=1,sector=ds,addr=1b2,data=0;
verify with
sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
it should read
[tt]
ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 00 00 01 00 03 00 00 00 00 00 00 00 FF FF ................
[/tt]
if this is okay, try to dump
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Thread starter
- #5
Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
If not PCASI then I will do SACOS tomorrow (weekend) with a backup HD in hand.
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
If not PCASI then I will do SACOS tomorrow (weekend) with a backup HD in hand.
- Thread starter
- #6
Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup HD in hand.
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup HD in hand.
- Thread starter
- #7
Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup Flash in hand.
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.
Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup Flash in hand.
whosrdaddy
Vendor
you must do this with sacos since we are changing live data ,not reload data.
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Thread starter
- #9
- Thread starter
- #10
Good day Daddy,
Thanks for your input to the problem it has added to my knowledge. I was a bit scared to go for SACOP as per your warning. Reason my guy misplaced the flash with latest dump. So I decided to RFEXI the system snd it is dumping Now.
Cheers !
Thanks for your input to the problem it has added to my knowledge. I was a bit scared to go for SACOP as per your warning. Reason my guy misplaced the flash with latest dump. So I decided to RFEXI the system snd it is dumping Now.
Cheers !
whosrdaddy
Vendor
Hi,
do a sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
and print the results here...
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
do a sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
and print the results here...
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Status
Similar threads
- Locked
- Question
- Locked
- Question