We purchased a used switch. It's not all clean on the inside though.
It says:
PT2000
REQ slt
TNS 1500 LEFT 835 USED 665
ACDN 1000 LEFT 990 USED 10
AST 800 LEFT 800 USED 0
LTID 96 LEFT 96 USED 0
DCH 255 LEFT 254 USED 1
AML 16 LEFT 15 USED 1
IDLE_SET_DISPLAY ÄÕÎÎ ÁÉÒ
ACD AGENTS 400 LEFT 400 USED 0
BRI DSL 50 LEFT 39 USED 11
INTERNET TELEPHONES 0 LEFT 0 USED 0
There's a pile of phone's still configured in the system. I spent some time and cleared the names out of LD95, but now I need to figure what TN's all those other phone's are configured at. I have TN's 28 0 1 thru 5 configured with analog and digital cards and that's all that should be on there.
I'm thinking most of these TN's configured are for cards that don't exist in the system. I'd like to do some cleanup of some of the old configuration.
Thanks,
Buster
It says:
PT2000
REQ slt
TNS 1500 LEFT 835 USED 665
ACDN 1000 LEFT 990 USED 10
AST 800 LEFT 800 USED 0
LTID 96 LEFT 96 USED 0
DCH 255 LEFT 254 USED 1
AML 16 LEFT 15 USED 1
IDLE_SET_DISPLAY ÄÕÎÎ ÁÉÒ
ACD AGENTS 400 LEFT 400 USED 0
BRI DSL 50 LEFT 39 USED 11
INTERNET TELEPHONES 0 LEFT 0 USED 0
There's a pile of phone's still configured in the system. I spent some time and cleared the names out of LD95, but now I need to figure what TN's all those other phone's are configured at. I have TN's 28 0 1 thru 5 configured with analog and digital cards and that's all that should be on there.
I'm thinking most of these TN's configured are for cards that don't exist in the system. I'd like to do some cleanup of some of the old configuration.
Thanks,
Buster