Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

System after 1 Hour stop the connection to the net.

Status
Not open for further replies.

adalsmosh

Technical User
Dec 27, 2004
8
US
OP System 98 SE
Connection DSL SBC / 2 WIRE

The connection to the net after apprx. one hour stop working. I have to restart computer to start the online connection again. The 2 Wire system the last bulb (Local Network) turn-off after an hour and thats when everything starts. I checked the LAN Card, the cables, the company connection and ran spyware (Spyboot, adware, spy subtract, Norton Symantec Antivirus, Zone Alarm) and nothing seems to help the computer keep doing the same thing. After the net goes down the computer keeps working normally; the computer do not crash or anything, only that you are not able to connect to the net. I ran also Start/Run type command, press enter, type winipcfg/release, press enter, type winipcfg/renew. to reestart the network connections but this is not helping either. Any suggestions.

Adal
 
Check the lan card setup proporties for any "shutdown on ...." settings.
 
In the resource Type reads Interrupt Request 11 and it can not be change.
 
No. I meant under the "Power" heading (may be listed in "Advanced"). Should be a setting "Allow this item to be shut down.....".
 
I checked the land card setting but there is not shut down setting. Maybe I am looking at the wrong place can you please direct me to the right place. Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top