Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sysmonitor and determining IPO500v2 reboot date

Status
Not open for further replies.

ACSscott

Programmer
Jan 22, 2015
36
US
I have a 500v2 here V9.0.12
The issue is that users complain the volume on 9608 phones keeps changing back to a loud volume every week or so.
When I look right now in SSA, the longest idle PRI trunk, and the alarm for the PRI going down, and the control unit audit last reported write with reboot, all coincide to 60 days ago.
However when I start monitor, it says ********** System (IP Address) has been up and running for 11days, 4hrs, 27mins and 1sec(966421448mS) **********

Does anyone know what this disparity is about? If the system lost power, would that loss not be shown in the PRI trunk alarms or the channels? Is this message when you connect Monitor more accurate?

Thanks.
 
System status shows the last reboot if you click on alarms.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications
 
Right. That matches up with everything else in SSA. I'm just wondering about that message when I bring up monitor that the system has been up and running for 11 days....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top