RJGlasener
MIS
I need to sync the the time of our novell servers to a windows NT 4.0 server that contains a GPS clock receiver.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Syncing time to winnt 40
- Thread starter RJGlasener
- Start date
- Status
RJGlasener,
In order for your NetWare 5 server to use the NTP protocol (versus timesync, which is the default), You must load NTP.NLM at the server console (assuming that you have TCP/IP loaded on your Novell servers). When this is loaded, a default ntp.cfg file is created in the SYS:ETC directory.
Edit this file to point to Windows NT 4.0 server either by IP address or DNS name. The file is self-explanatory, i.e. instructions are commented out. You have to uncomment the correct portion of the file, and enter the appropriate values.
This should do it for you. Good luck
Matt Ziegler
CNE, MCSE
matgz@ip-pro.com
In order for your NetWare 5 server to use the NTP protocol (versus timesync, which is the default), You must load NTP.NLM at the server console (assuming that you have TCP/IP loaded on your Novell servers). When this is loaded, a default ntp.cfg file is created in the SYS:ETC directory.
Edit this file to point to Windows NT 4.0 server either by IP address or DNS name. The file is self-explanatory, i.e. instructions are commented out. You have to uncomment the correct portion of the file, and enter the appropriate values.
This should do it for you. Good luck
Matt Ziegler
CNE, MCSE
matgz@ip-pro.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question