Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Synching through E-mail 1

Status
Not open for further replies.

Darren24

MIS
Apr 16, 2002
7
IE
I would like to know exactly what to do after creating and sending a transfer set through e-mail. Where do I put the gst file? Please advise!
 
put it anywhere you like as long as you point to it's location properly when you retrieve it.

Note also that if you simply retrieve this e-mail within GoldMine on the receiving system, you'll be advised that the mail has a transfer set attached and asked if you'd like to go ahead and retrieve it right then. :)

Doug Castell
Computer Control Corp
(310)396-6811
 
Hi Darren24,
I am going to be using GOLDSYNC v 6.5 shortly. Is the Email transfer set option o.k ? Is it fast enough ? Any bad things about it ?
Appreciate any comments you have

Dunkster
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top