usxpress4080
Technical User
We have an Opt 81c and Symposium 5.0 which connects to Genesys. For some reason we loose the link to the switch a couple of times a week. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Symposium link
- Thread starter usxpress4080
- Start date
- Status
nortelinsd
Technical User
Can you post the error you get from the 81C?
If a tree hugger falls in the woods...who cares?
If a tree hugger falls in the woods...who cares?
- Thread starter
- #3
usxpress4080
Technical User
I don't see any errors on the PBX. The elan stays active. It seems to be on the Symposium side. Our vendor was onsite and we hard coded the equipment Lan to 100 mg. I have noticed a lot of BUG 302 codes on our 81C.
lretrievers
Vendor
The ELAN (if it is going to the PBX also) cannot be at 100mg; must be 10mg pipe.
- Status
Similar threads
- Locked
- Question
- Locked
- Question