Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Symposium express 4.2 manual restore

Status
Not open for further replies.

EricBowmaster

Technical User
Feb 11, 2008
5
CA
Have a Symposium express 4.2 server that had c: partion corruption could not repair too corrupt.
Is their a way to manually restore the Symposium files from old drive to a new drive as no symposium backup is available.The d f g partions are good.
 
Do a back up and re-install SECC then restore from it.
 
Too true. That is a good reason to have a current Symposium Platform Recovery disk and backup always at hand... :-(
 
Sorry to hear that you got no back-up. There is no way to restore, you have to manualy in put everything.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top