Craig Tull
Programmer
First let me say hello to all from South Texas!
OK I have a MX controller that I was going to put back in service after being stored, it has a hard drive and I figured that would not be necessary, so I tried installing a CP card, that did not work as when I went to look for the MOSS sheet which I have stored for EVERY switch I have it was missing (big mistake I know), I did not save the database because I was going to start over anyway.
OK no problem just re-install the original hard drive right? no, now I cannot log into the controller as I get an authorization failure.
I am wondering if there is any other options but to try to get a copy of the MOSS sheet from Mitel, not sure if our company is still in good graces with them (we dealt directly with Mitel, actually bought the first SX2000S imported into the US) as the powers to be are real big on Cisco and it has been a decade since I was last certified.
Thanks
OK I have a MX controller that I was going to put back in service after being stored, it has a hard drive and I figured that would not be necessary, so I tried installing a CP card, that did not work as when I went to look for the MOSS sheet which I have stored for EVERY switch I have it was missing (big mistake I know), I did not save the database because I was going to start over anyway.
OK no problem just re-install the original hard drive right? no, now I cannot log into the controller as I get an authorization failure.
I am wondering if there is any other options but to try to get a copy of the MOSS sheet from Mitel, not sure if our company is still in good graces with them (we dealt directly with Mitel, actually bought the first SX2000S imported into the US) as the powers to be are real big on Cisco and it has been a decade since I was last certified.
Thanks
