Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX200 ICP

Status
Not open for further replies.
Technorth

Technorth

ISP
Sep 4, 2013
9
CA
Sx 200 ICP has crashed. On restart the 200ICP clears "disk configuration is complete" but then gets stuck at "Loading /ata00/Kts8250.vx". I suspect it is a hardware issue but not sure if it is a hard drive or control board etc.

 
Sort by date Sort by votes
Is the 200 an AX? If so, AX cabinets use compact flash cards; not hard drives.
 
Upvote 0 Downvote
if it is the hard drive replace with a flash, I haven't used a hard drive for years and even with the new ones I removed the hard drive and used a flash
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

The mitel guy
  • Locked
  • Helpful tip
Mitel sx200 series licensings and passwords
Replies
5
Views
897
jpruder
jpruder
jpruder
  • Locked
  • Question
SX200 LW19 magicrom.bin
Replies
0
Views
175
jpruder
jpruder
idahomitel
  • Locked
  • Question
SX 200 ICP CFNA and xfer problems
Replies
18
Views
822
The mitel guy
The mitel guy
Tech guy 297
  • Locked
  • Question
ICP/PBX Networking > IP networking > Network IP adress
Replies
4
Views
284
Billz66
Billz66
Stand1
  • Locked
  • Question
Mitel SX200 ICP Onboard LS Class Trunks
Replies
1
Views
166
kwbMitel
kwbMitel

Part and Inventory Search

Sponsor

Back
Top