SX200 ICP> Outbound Caller ID

[jabbo99]

How do you set up outbound caller ID for a 200 connected to a PRI?

Thanks

 

[jabbo99]

Or rather, how can you control outbound CLID. The problem I'm having is that the extension numbers are showing up on CLID for outbound calls.

thanks

 

[chelmik]

fill in form 54

 

[jabbo99]

Ok. So if no calling party number is entered in form 54, by default, the PBX will send the room or extension numbers of the phones programmed in CDE?

 

[jabbo99]

I added the main number to all of the stations and supersets in form 54. However, CLID still isn't working. The CLID information being displayed is Unavailable +1 Restricted.

Thanks

 

[kwbMitel]

Confirm you are sending something like *4*6*4 in the Modified Digit String

Confirm that you have CPN Enabled in same form for specific table being used.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[jabbo99]

That was it kwbmitel. Chelmik and kwbmitel, thanks for your help!