Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX200 AX>Remote Access via Network

Status
Not open for further replies.

jabbo99

Technical User
Nov 4, 2013
957
US
All,

I installed a SX200 AX and the wired ports at a hotel. The system is on the hotels network. I can remotely access my router and core switches but not the SX200. I'm able to reach the certificate page. I click on the option to proceed and get the message: "page cannot be displayed." Ideas??

Thanks
 
I’ve run into an issue with a SX200 AX install. The system is on the hotels network and port forwarding has been set up so that I can access it from a web browser. Well, that’s how it’s suppose to work. I’m able to reach the security certificate page but not the system login page. I’ve reached out to my network management company.

They’re are forwarding it to the server, but it looks like once it hits that, it seems to do some kind of redirect to the URL, dropping the external port we are using to do the forwarding on. We are getting the traffic to the phone server, but it appears to be doing something to manipulate the URL doing the login page loading. They’ve asked if the SX200 has any access control list but I’ve searched and have found no such list in it.

Thanks
 
Have you tried adding the IP address of the system in java under security tab or lowering the security settings?
 
I use Chrome all the time, try it if it is not the setting in your java
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top