Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX 50 1

Status
Not open for further replies.

crownroyalmopar

Technical User
Sep 27, 2007
30
US
Hello,

I have a customer who has a Mitel SX-50, it is a small hotel and the lines are currently set to GS. They are wanting to switch to LS lines. I noticed the card is an LS/GS card. Can anyone tell me what is involved with changing this, is there a strap on the card and programming involved. I do not work on many of the older Mitels and have been trying to locate my manuals for it with no luck. If someone has some instructions on this that they would like to share that would great, Thank you
 
if your trunk card is in slot 1 you would go into command 501 if in slot 2 502 etc. The register in one of those commands is register 2 bit "G", if set to a 0 it is loop, if set to 1 is ground
 
There is also an option switch on the cards for GS or LS. This is a per circuit option.

NO GOOD DEED GOES UNPUNISHED!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top