SX 50 reducing lines from 6 to 2

[phoneguyUSA]

I appoligize ahead of time, I do not have experience with the SX 50. I have a customer with a motel that reduced his lines from 6 to 2 and now I need to program the switch so his customers can call out without getting dead air. Any help is appreciated

 

[floppy1]

Cant recall the programming but can busy trunks from console. *41 followed by trunk equip number to busy *51 followed by trunk equip number to unbusy. Not sure if this is sustained after reboot ?

 

[phoneguyUSA]

Floppy1, thanks so much. I will do that. I appreciate it

 

[pandabear1]

don't know where your trunk cards are located but whichever 5xx command, go to register 1 and change bit "b" to a "0" and that will remove them from the trunk group. I always started trunks in slot 10 so the trunk numbers there would start at command 573, if you need the others let us know.

 

[phoneguyUSA]

Pandabear1, thanks. Will let you know if I need anything else. Appreciate it