SX-200ICP New SW Load 5.0.2.14

[kwbMitel]

Came out in February

The release notes seem to be saying nothing is new to this load that wasn't already in 5.0.2.12

What am I missing?

**********************************************
What's most important is that you realise ... There is no spoon.

 

[jpruder]

e series phone support from what I remember

 

[kwbMitel]

e series was delivered in 5.0.2.12

**********************************************
What's most important is that you realise ... There is no spoon.

 

[kwbMitel]

To be more specific in my response above. The Release notes state the following:

Product Enhancements & Functional Changes In Release 5.0 UR 5
SX-200 ICP Release [highlight #FCE94F]5.0 UR 5[/highlight] delivered the following hardware components and functionality
Support for 5330 and 5340 “e” series sets.

This appears to state that the e-series was introduced in this load.

However, when we check the release history we see the following:

[pre]
5.0.0.18 Mitel SX-200 ICP Release 5.0 June 2009
5.0.1.11 Mitel SX-200 ICP Release 5.0 UR1 January 2010
5.0.2.3 Mitel SX-200 ICP Release 5.0 UR2 July 2010
5.0.2.11 Mitel SX-200 ICP Release 5.0 UR3 June 2012
5.0.2.12 Mitel SX-200 ICP Release [highlight #FCE94F]5.0 UR 5[/highlight] December 2012 <-- e series delivered
[/pre]

Further, under the Bug Fixes sections

Fixes for Customer-Reported Problems
The following customer reported problems fixes are resolved in Release 5.0 UR5
- no field found issues resolved in 5.0.2.14

Anecdotally, I can verify that I've been installing e-series phones on the 200 for quite some time.




**********************************************
What's most important is that you realise ... There is no spoon.

 

[pandabear1]

I found this in the release notes:

Fixes for Customer-Reported Problems
The following customer reported problems fixes are resolved in Release 5.0 UR5
- no field found issues resolved in 5.0.2.14
-
Dpar Description of Problem
MN00604453 PRI trunks left in busy out state after yellow alarm is clear.
MN00608209 Enhancements to improve security for WEB access

 

[kwbMitel]

So pandabear, you are interpreting those dpars as delivered in this load?

I took the statement of no field found issues resolved to mean no.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[pandabear1]

to be honest I wasn't sure if it was or not from what I read just thought I would throw that out there.

 

[jpruder]

I might of had to do with compatibility with the current firmware that is on new e series phones

 

[kwbMitel]

I have 5.0.2.14 running on a new system

The Main Load on a 5340e is 06.02.00.01 . I can't say if that is different or not but I don't think so.

L2 Boot is 06.01.00.10


**********************************************
What's most important is that you realise ... There is no spoon.

 

[jabbo99]

I've installed several SX200 ICPs running 5.0.2.12 with 5330e and 5340e IP phones over the past couple of years and have had no issues with them.