SX 2000 Console overflow 2

[QLand]

Hi people.

I usually work on Nortel equipment so this is kind of new to me. I'm trying to figure out where i have to go to program all incomming trunk calls to ring both at the switch board and at a basic analog extension at the same time.
Also i was trying to put the console together in a hunt group with two analog extension: (0, 4405, 4406), But everytime i trry to set this up it tells me 'pilot number already in use'.I used '0' as the pilot number. Don't work.

What am i doing wrong?

 

[kwbMitel]

The system is not designed to function that way.

Console LDN's cannot belong to groups or be associated with another device.



*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[M1tel]

you can have the system ring both by having a ran (nortel world) that will provide a message while the console is ringing. This is done by programming a rad then using call rerouting to send a no answer to the rad. while the rad plays it will continue to ring the console. after the rad you will get music on hold