SX-2000 Backup

[tomjr87]

Hi,

We have recently taken over maintenance of an SX-2000 which is managed locally and not via OPS Man. Problem is its being migrated to a 3300 and the database needs to go through a conversion obviously. But without getting a backup to my laptop how would I do this? As far as I am aware currently I could only backup to an RSD....although I could be totally wrong.

Any help would be much appreciated.

 

[Lundah]

There's a Config Tool that runs on a PC to download the SX-2000 database. Part number 50005152.

 

[tomjr87]

Lundah, I have looked up that Part Number and I can't see that it exists??

 

[LoopyLou]

Part number may have changed or it might not be available any longer, but Lundah is right in that there is/was a tool to get the database.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[MitelInMyBlood]

I've got an old version of it, rls 1.6.0.5 from July of 2005, but it appears to be load-dependent. IE, this one works with the old 3300 MX and SW rls 6 or prior.

Seems I recall at one time the config tool was included on the distribution disk with the load. If you have an MOL Tech-ID you might still be able to download it (a newer one) from Mitel In Line.

My tech ID has long since expired. I'm supporting a Cisco Call Manager today.

Original MUG/NAMU Charter Member