SX 2000 adding trunks

[fromill]

I am adding 2 cellular trunks to our SX2000 system. I have most of the ARS programming figured out but I think it is dialing the digits too soon. I think the Mitel needs to wait a moment after getting dial tone before dialing the number. How is the best way to do this?
Thank you.

 

[MitelInMyBlood]

Use the Call Progress Tone Plan Assignment form to create a false scenario, i.e., something the call won't encounter.

In other words, build a CAL P which is set to detect Reorder Tone and wait for say 5 secs.
Set Action on timeout to outpulse DTMF.
Use this in your Digit Mod assignment form for your cellular trunks.

A call destined for the cellular trunk hits the digit mod, looking for Reorder - it keeps waiting for reorder tone for 5 secs (or whatever you set the wait time at) then when it doesn't see reorder and the timer expires then the call is sent out on the trunk.

 

[fromill]

Thank you for your answer. By reading and experimenting I done about the same thing as you suggested. In the Call Prog Tone Assign I programmed detect NA Dialtone, wait for 5 sec. and outpulse Default. This seemed to work ok.