SX-200 generic 217

[tjcom]

Can someone refreash my memory on how to enter programming mode?
I know for extended programming you have to set the thumbwheel on the tone card to 777X (X is ....?).

But I just want to change a COR and COS on a room for long distance restrict like the other rooms.

trying to remember ......*55* ?

someone help?


thanks

 

[pandabear1]

if you use the thumbwheels you do not need the *55* or whatever you have in the access code program as that is where the *55* comes from.
If you use the thumbwheel the 777x can enter you and the x is the console port you are using i.e. 1

 

[pandabear1]

update to this one is when you set the thumbwheels to 777x and press the top left key on the console for programing you must set the thumbwheels to 7776 to continue

 

[cwc3]

7771 for console 1 then scroll down next in feature access Code
to find programing password you if you want
the programing sheets let me know i'll send the link!