Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Switching PRI carrier from Bell to Rogers 4

Status
Not open for further replies.

curlycord

Programmer
Sep 22, 2002
14,185
Toronto, Canada
System:
Option 11
VERSION 1411
RELEASE 21
ISSUE 44 +

Current carrier Bell = NI1
Future carrier Rogers = NI2 (so I am told)

Note from tech that did survey:
The Current PRI D-Channel card will not support NI2. The D-Channel daughterboard must be a MSDL, not a DCHI as it is currently.

Problem:
I have 2 other techs that disagree and say it should work fine as is.

Need some input/opinions before I sell on hardware.

Thanks

=----(((((((((()----=
curlycord
 
got to change the card.. see if rogers can NI1 or ?

john poole
bellsouth business
columbia,sc
 
You also need software package 291

LD 22
req: Prt
Type: PKG
 
-johnpoole says I need to change the card as well.
-Reusser gave a part number that seems to be DDCH and not MSDL?
Also why do I need to print the package?

MSDL seems to be a card and not a daughterboard.

Getting more confusing now.....I am BCM/Nortar ex tech so PBX not my forte, sorry!

=----(((((((((()----=
curlycord
 
NTBK51BA is a daughtercard that connects to the PRI card you already have NTRB21

The NTBK51BA is programmed as a MSDL and only card you need to replace

You need to print packages to verify you have package 291. If you don't, no need to get card as NI2 will not work anyway.
 
Curly you may have that package but it's always a good a idea to be sure

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
Release 21 may be an issue here. TMDI isn't supported below release 24 and the downloadable d-channel - NTBK51BA - may have hit the market with release 22, 23, or 24.

If there is an open card slot in the main cabinet try and program a T1/PRI with an MSDL based NI2 dch and see if it takes.

The existing d-channel daugther board should support protocals D100, D250, ESS4, ESS5, and ...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top