Marcimallow
Technical User
In our class, we had a project to hook up 3 routers and one switch to the third router...I had the fun of the switch...I set up the subinterfaces on the router for the vlans, and then went to set up the switch. When it got to the VLANs I only assigned an IP to VLAN1- Native. It started out as shut down, so I did a no shut, it brought vlan 1 up but took vlan 10 down, so I went to int vlan 10 and did a no shut and when it came up it stole the IP from vlan 1 and shut vlan 1 down, this process continued for about 4 hours and through many reconfigs...even to the point of erase start and reload...does anyone have any idea what is happening??? Thanks for any replys