swapping a analog card to a digital 2

[CRDFortmyers]

Hey there, Need some help on taking out a analog line card and replacing it with a digital line card.

 

[Johnthephoneguy]

Make sure you out all the Tn's on the Analog card, disable it, then simply plug the DLC card in its place. It will remain disabled until you build the 1st phone and then you will see the red light go out.

 

[acewarlock]

Sometimes you will need to do
LD 20
REQ OUT
TYPE OOSSLT
TN XX Card slot in an Option 11C
XX XX in a large Option

 

[CRDFortmyers]

Thanks for the quick response. I did out all the tn's and I disabled the the line card. I inserted the new digital line card and did a stat 3 (line card in slot 3) and it shows 00 through 14 unequiped and 15 disabled L500. Is that norma before I try to build a new set? Thanks

 

[acewarlock]

No they should all be unequped, there is still 1 port with a phone on it. Also do as I said in mt last post.

 

[CRDFortmyers]

Thanks after I submitted my last response I realized what I was asking. It came up fine. While building a new 2616 it asks for the tn and while stepping through it didn't prompt for the dn. Am I overlooking something or just program the dn on the key00 prompt? Thanks

 

[acewarlock]

KEY 0

 

[CRDFortmyers]

Thanks for all the help. Have a good day well whats left of it.