Swap out ENET card with Dual PRI

[puckster99]

Hi All,

If I have a conf/TDS in slot 0 (loops 0&1) and an ENET card in slot 1 (loops 2&3) that goes to two QPC 720's. I want to swap the QPC 720's out with a Dual PRI card, can I just disable loops 2&3, dsbl the ENET card and swap the ENET card out with the Dual PRI without having to reconfigure anything. There are no DCH's built against these T1's currently, they are NFAS to a different loop/DCH

Any help would be appreciated.

 

[bigindian65]

your enet use to run Mermail or something? You cant swap without cequ changes, no.

Mato' Was'aka

 

[puckster99]

The ENET card is connected to the QPC720's, they are configured in the CEQU as PRI's already, there is no MMail envolved.

 

[bigindian65]

Here's what, post the CEQU and a tN off the ENET. Maybe you can???

Mato' Was'aka

 

[telebub]

Yes you can. If there are no d-channels involved, then do like you said, disable the loops, remove the ENET card, install the duakl PRI card, and re-enable. Of course, the dual PRI card will need the proper cabling completed from the front of it to the back of the switch. And then connect your circuits to the DB15 connectors.

War Eagle!
Lions Baseball '09!