Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV9500 with MG-SIP trunks wont send different Caller ID info

Status
Not open for further replies.
Jmavro50

Jmavro50

Systems Engineer
May 8, 2023
3
US
Been trying to send different caller ID info for some phones using ACPNCL command but it doesn't seem to work. Is there another command for Native SIP trunks?
 
Sort by date Sort by votes
Does your carrier allow you to send different caller ID? ACPNCL is the correct command.
 
Upvote 0 Downvote
Yes they do. we are using BluIP and for some reason when we do the ACPNCL command it doesn't change the outgoing CID. I wasn't sure if SIP had some hidden command. So its got to be something on the carrier end since we are setup correctly. Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jmavro50
  • Locked
  • Question
SV9500 SE MG-SIP trunks sending Guest name out to BluIP AVa
Replies
0
Views
238
Jmavro50
Jmavro50
Q
  • Question
SV9100 CP10 Intermittent no outbound with SIP trunks
Replies
2
Views
307
gbtac3
gbtac3
vgenrikh
  • Locked
  • Question
SV9500 - Incoming calls with blocked-caller-ID get Name Display "TIE"
Replies
1
Views
141
3racefan3
3racefan3
Mirzapur
  • Locked
  • Question
SV9500 Hardware Key
Replies
3
Views
161
DoubleDriveLine
DoubleDriveLine
mr_infek
  • Locked
  • Question
SV9100 with two different SIP trunks
Replies
4
Views
233
BrixStand
BrixStand

Part and Inventory Search

Sponsor

Back
Top