sv9300 SIP TRUNK

[herestone]

Hi All,

Can I ask where I can Program the SIP Trunk Caller I.D. Because everytime there is an incoming trunk call the display on the operator phone is SIP only , it did,nt display the no. of the caller.

Thanks

 

[gbtac3]

My lab is down so I have not confirmed my notes, but here they are -

CLID Fields:
CM08
379
462
507
524
539
563
584
603
736
1012
NOTE: When the second data of this command is set to 0 (Available), the second data of CM13 Y=69 must also
be set to 0 (To provide) for My Line.


CM12
20
56

CM13
69

CM15
214
215
224
225
236
400
409

CM35
318

CM90
00-F5010 (display CLID)