SV9100 voicemail to email

[conxtel]

Trying to setup voicemail to email on a 9100 with InMail. I have done it before and it isnt overly complicated.

I cannot get the system to deliver the email. I have run the debug tool and get the below error:

EmailService: received request, request - 2, client id - 0x6232b74, transaction id 18
EmailService: sending response to client - 0x6232b74, queue_id - 0x6232b74
EmailService: request - 2, response - 1, transaction id 18
intramail_email_response_monitor: received response, request - 2, response - 1, client id - 0x6232b74, transaction id 18
== 24/SEP/2024, 14:3:52 ==
*(EVENT),ID:00000000H,P1:00D00000H,P2:1E7F1224H,P3:00000072H
*(INTER),ID:00000381H,P1:00D0000DH,P2:1E7D3984H,P3:00000595H
*(EVENT),ID:00000000H,P1:00D00000H,P2:1E7F12CCH,P3:00000072H
*(INTER),ID:00000381H,P1:00D0000EH,P2:1E7D3BE0H,P3:00000595H
*(EVENT),ID:00000000H,P1:00D0000DH,P2:00000000H,P3:00000070H
*(EVENT),ID:00000000H,P1:00D0000EH,P2:00000000H,P3:00000070H
EmailService: Spawning thread for request - 2, client id - 0x6232b74, transaction id 18
EmailService: Streaming command - /usr/bin/nbsmtp -fvoip@mg.xxxxxxxxx.xx -hsmtp.mailgun.org -N -n -V -Uvoip@mg.xxxxxxxxx.xx-Pvoip24smtp# -M 0 -p 25
Error in send_mail
Mail NOT sent.

I removed the email address with the x's.

 

[CoralTech]

You need to run VMUAID. That will tell you precisely what is going on.

 

[Tech NEC]

Trying to setup voicemail to email on a 9100 with InMail. I have done it before and it isnt overly complicated.

I cannot get the system to deliver the email. I have run the debug tool and get the below error:

EmailService: received request, request - 2, client id - 0x6232b74, transaction id 18
EmailService: sending response to client - 0x6232b74, queue_id - 0x6232b74
EmailService: request - 2, response - 1, transaction id 18
intramail_email_response_monitor: received response, request - 2, response - 1, client id - 0x6232b74, transaction id 18
== 24/SEP/2024, 14:3:52 ==
*(EVENT),ID:00000000H,P1:00D00000H,P2:1E7F1224H,P3:00000072H
*(INTER),ID:00000381H,P1:00D0000DH,P2:1E7D3984H,P3:00000595H
*(EVENT),ID:00000000H,P1:00D00000H,P2:1E7F12CCH,P3:00000072H
*(INTER),ID:00000381H,P1:00D0000EH,P2:1E7D3BE0H,P3:00000595H
*(EVENT),ID:00000000H,P1:00D0000DH,P2:00000000H,P3:00000070H
*(EVENT),ID:00000000H,P1:00D0000EH,P2:00000000H,P3:00000070H
EmailService: Spawning thread for request - 2, client id - 0x6232b74, transaction id 18
EmailService: Streaming command - /usr/bin/nbsmtp -fvoip@mg.xxxxxxxxx.xx -hsmtp.mailgun.org -N -n -V -Uvoip@mg.xxxxxxxxx.xx-Pvoip24smtp# -M 0 -p 25
Error in send_mail
Mail NOT sent.

I removed the email address with the x's.

Download an app named JBmail and send the email using the settings in 47-18. It will also tell you whats wrong.

 

[TheTeleTech]

@Tech NEC That was a good tip about JBmail - I had not heard of that client. Thanks !

 

[conxtel]

The above info was from using the VMUAID in the debug tool. It didn't say much, just "Error in send_mail. Mail NOT sent"

Turns out i had fat fingered my DNS address, doh, lol.

Thanks for suggesting JBmail. I'll check it out for future issues.