OldNortellian
Vendor
New install, upgraded to 1.80. All IP phones in system. Trying to get one to come up, the display reads "full port". Licensing is correct. Any ideas? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SV9100 IP question
- Thread starter OldNortellian
- Start date
- Status
Sorry to steel this thread for a second, as I'm also in the middle of setting up a new 9100.
In mine, I already did this 10-54 step for 5103.
I also have licenses for SIP trunks. 10 of them. Do I need to put those in this command? 10-54? What's the feature code for that license?
Also, how do I verify what licenses are available in the system? I have 4 analog ports, 15 IP phones and voicemail. Do all need to have licenses and do all need to be loaded in 10-54? What's the code for those?
In mine, I already did this 10-54 step for 5103.
I also have licenses for SIP trunks. 10 of them. Do I need to put those in this command? 10-54? What's the feature code for that license?
Also, how do I verify what licenses are available in the system? I have 4 analog ports, 15 IP phones and voicemail. Do all need to have licenses and do all need to be loaded in 10-54? What's the code for those?
- Status
