Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV9100 CP20 Netlink issue

Status
Not open for further replies.

curiousgbjr

Technical User
Oct 4, 2017
5
US
I have a customer with a netlink system. They had 9 sites and we added a 10th. All sights use IP phones. During the installation of the 10th sight. All sites lost button programming on phones. They seemed to have reverted to a default of lines 1 through 8. We did a full restore of the database and it appeared to have solved the issue. Another tech was working on the system today and said that it happened again. He didn’t say if he found it that way or it happened when he was making changes. PC Pro was used to set up the IP phones. But used web pro for all other changes. Any ideas on what may be causing it?
 
Sounds like you messed up the programming on the 10th system. Probably trying to take over as primary system. I would check that you have enough netlink and ip resource licenses also.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top