SV9100 Alarm -- SD Access Restrict

[phone_troll]

Any info on this? I am unable to find anything about this in any of the guides. I see instances of this all the way back in September, but they usually only happened twice. On 12/30, it happened a ton of times. No issues on the PBX, that I can see. At least...not yet.

Thank you!

MAJ 0049 ERR 12/30/19 10:02 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:03 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:03 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:04 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:04 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:05 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:05 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:06 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:06 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:07 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:07 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:08 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:08 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:09 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:09 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:10 SD Access Restrict -none- 00 00
MAJ 0049 ERR 12/30/19 10:10 SD Access Restrict -none- 00 00
MAJ 0049 REC 12/30/19 10:11 SD Access Restrict -none- 00 00

 

[belevedere]

Do you have an SD card installed for the InMail? If so, check to see if the small slide switch on the card is set to protect. If so, slide it to the write side.

 

[phone_troll]

I do. I'll need to make a site visit to confirm. Thanks