Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV8300

Status
Not open for further replies.

bwc58

Technical User
Nov 9, 2005
37
US
I built a new extension but the prime line is showing on button 6. I have all nec series e 8 button phones and they all programmed and work fine.I have checked the program on this new extension and it shows just like all the rest.Any help would be appreciated.
 
Still does not work , it was already programmed that way , do we need to bump the switch to make that change , thanks for a fast response.
 
What model phones do you have? You might have to look at CMD 1224 for the type of phone for proper button location. Compare the assignment to a good working phone. If you change this assignment, reset the phone. (unplug it then plug it back in).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top