Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV8300

Status
Not open for further replies.
bwc58

bwc58

Technical User
Nov 9, 2005
37
US
I built a new extension but the prime line is showing on button 6. I have all nec series e 8 button phones and they all programmed and work fine.I have checked the program on this new extension and it shows just like all the rest.Any help would be appreciated.
 
Sort by date Sort by votes
Still does not work , it was already programmed that way , do we need to bump the switch to make that change , thanks for a fast response.
 
Upvote 0 Downvote
What model phones do you have? You might have to look at CMD 1224 for the type of phone for proper button location. Compare the assignment to a good working phone. If you change this assignment, reset the phone. (unplug it then plug it back in).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

herestone
  • Locked
  • Question
SV8300 Unit System Interconnection 2
Replies
2
Views
117
DoubleDriveLine
DoubleDriveLine
deadinthefield
  • Locked
  • Question
SV8300 Multiple calls on single DID not working
Replies
2
Views
113
deadinthefield
deadinthefield
herestone
  • Locked
  • Question
SV8300
Replies
1
Views
119
DoubleDriveLine
DoubleDriveLine
herestone
  • Locked
  • Question
NEC SV8300 (Existing System) to NEC SV9100 (New System) Interlink through PRT to PRT Card
Replies
1
Views
91
CoralTech
CoralTech
mitchell70
  • Locked
  • Question
SV8300 Call blocking using CID Call Routing 1
Replies
2
Views
113
mitchell70
mitchell70

Part and Inventory Search

Sponsor

Back
Top