SV8300 Licensing Question 2

[ths0210]

From running command F88>001 (see attached) I'm confused with the difference between VoIP Channels and IP Ports. I have a few more IP Ports but I'm assuming those aren't the ones I need to program new DT700 series phones that were purchased.

 

[neax]

VoIP Channels are the number of PAD channels.
IP Ports are the number of IP phones are currently registered and what you are licensed for.

F88>010:VoIP Channels :0128/0128 This means you are licensed for 128 PAD channels AND you have 128 already programmed.
F88>012:IP Ports :0192/0200 This means you have 192 IP Phones currently connected and logged on, leaving you 8 left since you are licensed for 200.

 

[belevedere]

Each IP phone also uses a port. 0400/0416, you have 16 ports unused.

 

[ths0210]

So since I have the 16 Ports and the 8 IP Ports, I should be okay for programming 4 DT700 Phones without licensing issues?

Thanks

 

[neax]

Correct.

You will see F88>001 go from 0400/0416 to 0404/0416 and F88>014 will go from 0192/0200 to 0196/0200